- 190 mm body height The lowest profile in the ZL Series, intended to drive under an existing material carriage rather than pick a load up on forks.
- 1,000 kg under-carriage transport The vehicle lifts and carries a compatible carriage rated to 1,000 kg between production and staging locations.
- Lithium iron phosphate battery This model's battery is specified in full as 48 V, 28 Ah lithium iron phosphate, rated for 1,500 cycles and recharging fully in up to 1.5 hours.
- Display-screen HMI This model has a display screen rather than the touchscreen fitted to the other three, so confirm the interface you expect.
- Two distinct lift dimensions The figures are hc 93 mm and h2–h3 245 mm, specified separately rather than as one lift range.
- Widest body in the series At 1,250 × 1,200 × 190 mm and 340 kg it needs an 1,800 mm minimum right-angle passing width against an 820 mm turning radius.
Description
The Under-run 1000kg is the low-profile member of the ZL Series: 190 mm tall, 1,200 mm wide and rated for 1,000 kg. It drives beneath a material carriage, lifts it and takes it where it is needed, which is a different proposition from fork handling because the thing being moved already exists on your floor.
That makes the carriage, not the vehicle, the first thing to check. The 190 mm body height has to clear the opening under the frame with an operating allowance, and the two lifting dimensions — hc at 93 mm and h2–h3 at 245 mm — are separate values rather than two descriptions of the same travel. Ask for the arrangement drawing showing the lowered position, the raised position and the carriage interface before deciding whether an existing frame can stay in service.
It is also the only model in the series whose HMI is a display screen rather than a touchscreen, and the only one whose battery is specified in full as lithium iron phosphate: 48 V, 28 Ah, 1,500 charge cycles, 6 to 8 hours of rated operation and a full recharge in up to 1.5 hours. Navigation is LSLAM with a QR-code option, differential drive, ±10 mm and ±1° positioning accuracy.
Its 1,200 mm width is the widest in the series and gives it an 820 mm turning radius against an 1,800 mm minimum right-angle passing width. Both apply to the vehicle alone — a carriage that overhangs its frame needs its own clearance check, including loaded turns and approach alignment. Carriers, lifting fixtures, protective sensor packages and any software interface are project scope rather than standard features.
Key Capabilities
- 190 mm body height: The lowest profile in the ZL Series, intended to drive under an existing material carriage rather than pick a load up on forks.
- 1,000 kg under-carriage transport: The vehicle lifts and carries a compatible carriage rated to 1,000 kg between production and staging locations.
- Lithium iron phosphate battery: This model's battery is specified in full as 48 V, 28 Ah lithium iron phosphate, rated for 1,500 cycles and recharging fully in up to 1.5 hours.
- Display-screen HMI: This model has a display screen rather than the touchscreen fitted to the other three, so confirm the interface you expect.
- Two distinct lift dimensions: The figures are hc 93 mm and h2–h3 245 mm, specified separately rather than as one lift range.
- Widest body in the series: At 1,250 × 1,200 × 190 mm and 340 kg it needs an 1,800 mm minimum right-angle passing width against an 820 mm turning radius.
This model is offered on a quotation basis. Configuration, accessories, integration scope and delivery schedule all change the final figure, so pricing is confirmed per project rather than listed.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.
Features
Specs
| Brand | ZLINK |
|---|---|
| Manufacturer | ZLINK Technologies (Zhengzhou), China |
| Model | Under-run 1000kg (ZL Series) |
| Product Type | Low-profile under-carriage automated guided vehicle |
| Rated Load | 1,000 kg |
| Dimensions (L × W × H) | 1,250 × 1,200 × 190 mm |
| Machine Mass | 340 kg |
| Turning Radius | 820 mm |
| Minimum Right-Angle Passing Width | 1,800 mm |
| Lifting Dimension hc | 93 mm |
| Lifting Dimension h2–h3 | 245 mm |
| Navigation | LSLAM / QR code |
| Positioning Accuracy | ±10 mm; ±1° |
| Drive | Differential |
| HMI | Display screen |
| Battery | Lithium iron phosphate, 48 V, 28 Ah (capacity customisable) |
| Charge / Discharge Cycles | 1,500 |
| Rated Operating Time | 6 to 8 hours |
| Recharge Time from Full Discharge | Up to 1.5 hours |
| Charging Methods | Automatic and manual |
| Carriage / Carrier | Not part of the vehicle — confirm at quote |
| Carriage Interface Geometry | Confirm at quote |
| Safety Sensor Package | Confirm at quote |
| Warehouse or Production Software Interface | Confirm at quote |
| Travel Speed | Confirm at quote |
Industries
Frequently Asked Questions
A material carriage. It drives beneath an existing frame, lifts it and carries it, with a rated load of 1,000 kg.
The vehicle body is 190 mm high, but fit also depends on the complete underside geometry, the lifting arrangement and an operating clearance allowance. Send carriage drawings and the interface is reviewed before anything is quoted.
No. The Under-run has a display screen, where the other three ZL Series models have a touchscreen.
A 48 V, 28 Ah lithium iron phosphate pack rated for 1,500 charge cycles, giving 6 to 8 hours of rated operation and a full recharge in up to 1.5 hours, with automatic and manual charging.
They solve different problems. The Folklift lifts pallets on forks, stands 1,986 mm tall and needs a 2,213 mm right-angle passing width; the Under-run is 190 mm tall, works under a carriage and needs 1,800 mm.
It is offered by quotation — configuration, quantity and delivery are confirmed per project.
Recently Viewed
You haven't viewed any products yet.
