- The contact part of the charging chain It provides the conductive surface that meets the charging base, so power can pass to the robot without a plug or cable.
- A forgiving docking target Contact plates let the robot align within tolerance rather than inserting a connector, which is what makes hands-free docking practical.
- A wear part by design The surface carries current and touches on every dock, so scratching, dust and oxidation are expected over a service life.
- First fit or replacement Order it to complete a self-charging installation, to replace a worn plate, or as a shelf spare for a fleet or classroom.
- Matched to the L1 dock It corresponds to the Genisom L1 Charging Dock, which is made for the L1 EDU and L1-W EDU, not to the larger M1 charging system.
- Fitment settled in writing Mounting position, fixings and whether your robot or dock already carries a plate are confirmed before the order.
Description
The electrode plate is the conductive contact hardware in the Genisom L1 self-charging chain. Docking chargers for mobile robots use exposed contacts rather than plugs, because a robot cannot reliably insert a connector on its own; the plate gives it a broad, forgiving target, and current flows as soon as the surfaces meet within tolerance.
It is a small part with an outsized role. Navigation can find the dock and the robot can align perfectly, but if the contact surface is worn, pitted, bent or oxidised the charge never starts and the session ends early. Because these surfaces carry charging current and touch every time the robot docks, they are the parts most exposed to wear, dust and scratching.
It belongs to the L1 charging chain alongside the Genisom L1 Charging Dock, which is made for the L1 EDU and L1-W EDU. Buy it as the first-fit contact part, as a replacement for a plate that has been through many docking cycles, or as a shelf spare so one worn component does not take a robot out of a teaching or research programme for a day.
Mounting position, fixings, whether your robot or dock already carries a plate, and whether any firmware setting is involved are all confirmed in writing before the order. It corresponds to the L1 dock, not to the larger M1 charging system.
Key Capabilities
- The contact part of the charging chain: It provides the conductive surface that meets the charging base, so power can pass to the robot without a plug or cable.
- A forgiving docking target: Contact plates let the robot align within tolerance rather than inserting a connector, which is what makes hands-free docking practical.
- A wear part by design: The surface carries current and touches on every dock, so scratching, dust and oxidation are expected over a service life.
- First fit or replacement: Order it to complete a self-charging installation, to replace a worn plate, or as a shelf spare for a fleet or classroom.
- Matched to the L1 dock: It corresponds to the Genisom L1 Charging Dock, which is made for the L1 EDU and L1-W EDU, not to the larger M1 charging system.
- Fitment settled in writing: Mounting position, fixings and whether your robot or dock already carries a plate are confirmed before the order.
This model is offered on a quotation basis. Configuration, accessories, integration scope and delivery schedule all change the final figure, so pricing is confirmed per project rather than listed.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.
Features
Specs
| Brand | Genisom |
|---|---|
| Model | L1 Electrode Plate |
| Product type | Electrode contact hardware (charging accessory) |
| Function | Conductive contact surface used in the L1 docking connection |
| Compatible robots | Genisom L1 family — confirm against your exact model |
| Used with | Genisom L1 Charging Dock (for the L1 EDU and L1-W EDU) |
| Not for | The Genisom M1 charging system |
| Material and finish | Confirm at quote |
| Dimensions and weight | Confirm at quote |
| Current rating | Confirm at quote |
| Mounting and fixings | Confirm at quote |
| Quantity per robot or dock | Confirm at quote |
Industries
Frequently Asked Questions
It provides a conductive contact area that meets the charging base, letting power pass to the robot without a plug or cable.
That depends on what shipped with your robot and dock. Tell us your setup and we will confirm whether you need it as a first fit or as a spare.
Replace it if the contact surface is visibly worn, bent, pitted or corroded, or if the robot docks correctly but charging does not reliably start.
It is intended for the Genisom L1 family. The dock it works alongside is made for the L1 EDU and L1-W EDU, so confirm your exact model before ordering.
No. It corresponds to the L1 Charging Dock. The industrial M1 uses a different charging station.
It is offered by quotation — configuration, quantity and delivery are confirmed per project.
Recently Viewed
You haven't viewed any products yet.
