- Four Tools, One Arm Gripper, suction cup, pen holder and 3D printing kit mount on a standard holder and change in minutes.
- Teach by Hand Students move the arm physically to record points and replay the motion with one click.
- Block Code to SDK Graphical programming in DobotLab or DobotBlockly comes first, followed by scripts, a communication protocol and a Dobot program library.
- Thirteen Expansion Ports Ten configurable I/O, a communication interface and two stepper motor interfaces connect sensors, rails and conveyors.
- Desk-Sized at 3.4 kg The arm stands on a 158 × 158 mm base and runs from a standard wall adapter.
- Core Package This version leaves out the laser kit, wireless modules and joystick of the Educational Version and keeps the four core tools.
Description
The Dobot Magician Basic Version is the starting package of the Magician, a four-axis robot arm that sits on a classroom desk, plugs into a laptop and moves like a small industrial robot. With a change of end tool it picks and places blocks, writes and draws, and prints small parts in 3D.
It is the same arm as the Educational Version, supplied with four tools instead of five: the pneumatic gripper and suction cup with their air pump controller, the pen holder and the 3D printing kit. The laser engraving kit, the Bluetooth and Wi-Fi modules and the joystick come only with the Educational Version, so the Basic Version suits a course that needs the core tools now.
The arm carries 500 g including its tool, reaches 320 mm and repeats to ±0.2 mm. With a 250 g load, joints 1 to 3 turn at up to 320°/s and joint 4 at 480°/s. Built from 6061 aluminium alloy and ABS, it weighs 3.4 kg, runs from a 100 to 240 V AC adapter and works from −10 to 60 °C.
Thirteen expansion ports (ten configurable I/O, a communication interface and two stepper motor interfaces) plus four controllable 12 V outputs connect sensors, the linear rail and the conveyor belt. Students begin with teach-by-hand and block programming in DobotLab or DobotBlockly, then move to the SDK, the communication protocol and the Dobot program library.
Key Capabilities
- Four Tools, One Arm: Gripper, suction cup, pen holder and 3D printing kit mount on a standard holder and change in minutes.
- Teach by Hand: Students move the arm physically to record points and replay the motion with one click.
- Block Code to SDK: Graphical programming in DobotLab or DobotBlockly comes first, followed by scripts, a communication protocol and a Dobot program library.
- Thirteen Expansion Ports: Ten configurable I/O, a communication interface and two stepper motor interfaces connect sensors, rails and conveyors.
- Desk-Sized at 3.4 kg: The arm stands on a 158 × 158 mm base and runs from a standard wall adapter.
- Core Package: This version leaves out the laser kit, wireless modules and joystick of the Educational Version and keeps the four core tools.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope and configuration are agreed before dispatch, and on-site installation is not included in the product price.
Features
Specs
| Brand | Dobot |
|---|---|
| Model | Magician Basic Version |
| Part Number | 1100000015 |
| Product Type | Four-axis desktop robotic arm |
| Axes | 4 |
| Payload | 500 g, including the tool |
| Maximum Reach | 320 mm |
| Repeatability | ±0.2 mm |
| Joint Range | Base ±120°, rear arm −5° to +90°, forearm −15° to +90°, end servo ±140° |
| Maximum Joint Speed (250 g Load) | 320°/s on joints 1 to 3, 480°/s on joint 4 |
| Controller | Dobot integrated controller |
| Communication | USB; Wi-Fi and Bluetooth with optional modules |
| Expansion | 13 ports: 10 configurable I/O (analog input or PWM output), communication interface, 2 stepper motor interfaces; plus 4 controllable 12 V outputs |
| Power | 100 to 240 V AC adapter, 12 V / 6.5 A DC, 78 W maximum |
| Net Weight | 3.4 kg |
| Base Footprint | 158 × 158 mm |
| Package Dimensions (L × W × H) | 421 × 334 × 352 mm |
| Gross Weight | 7.2 kg |
| Materials | 6061 aluminium alloy and ABS engineering plastic |
| Operating Temperature | −10 to 60 °C |
| Gripper | Pneumatic, 27.5 mm range, 8 N |
| Suction Cup | 20 mm, −35 kPa |
| Pen Holder | Pens up to 10 mm |
| 3D Printing | PLA, 0.1 mm resolution, up to 150 × 150 × 150 mm |
| Software | DobotLab, DobotStudio, DobotBlockly, Repetier Host, GrblController 3.6 |
| SDK | Communication protocol and Dobot program library |
| Laser Engraving Kit | Not included |
| Warranty | 12 months manufacturer warranty |
| What's in the Box | Robot arm with power adapter and USB cable; pneumatic kit (gripper, suction cup, air pump controller); writing and drawing kit with pen holder and pen; 3D printing kit with extruder, hot end, filament holder and 200 g of PLA; tool package, calibration tool and quick start guide |
Industries
Frequently Asked Questions
No. The laser engraving kit, the Bluetooth and Wi-Fi modules and the joystick come with the Educational Version. The arm itself is the same in both.
Up to 500 g including the tool, with a 320 mm maximum reach and ±0.2 mm repeatability.
By teaching points by hand, with graphical blocks in DobotLab or DobotBlockly, or with code through the SDK, the communication protocol and the Dobot program library.
Yes. The included 3D printing kit prints PLA at 0.1 mm resolution, up to 150 × 150 × 150 mm.
The expansion ports take the Dobot conveyor belt, linear rail, sensor kit, Basic AI Kit and vision system.
The Dobot Magician Basic Version Desktop Robotic Arm is priced at Rs. 115,400 in your market. For volume or project orders, contact us for a business quote.
Recently Viewed
You haven't viewed any products yet.
