- IP68 arm The robot arm is sealed against dust and water for wet and dusty cells where a standard cobot would need a protective jacket.
- Fluororubber exterior All exterior plastic parts are fluororubber, which resists cleaning agents, oils and coolants.
- Positive pressure inside An internal pneumatic system pressurises the arm to help keep dust and moisture out.
- IP54 control cabinet The CC262 cabinet comes in AC and DC versions and is rated IP54.
- Unchanged CRA precision Repeatability stays at ±0.02 mm, so the sealing costs nothing in placement accuracy.
- Three ways to program Hand-guided teaching, graphical programming and code-based programming suit operators with and without robotics experience.
Description
The CR5AP is Dobot's 5 kg CRA cobot sealed to IP68 for the cells where standard arms struggle: food lines hosed down every shift, machining areas full of coolant mist, grinding stations thick with dust. It belongs to the CRA-IP68 series Dobot introduced in 2025, alongside the 10 kg CR10AP and the 20 kg CR20AP.
Three things set it apart from the standard CR5A. The exterior plastic parts are fluororubber, chosen for chemical stability and resistance to cleaning agents, oils and coolants. An internal pneumatic system keeps a slight positive pressure inside the arm, which helps keep dust and moisture out. And the control cabinet is rated IP54, so it can sit closer to the cell than an open controller.
The sealing leaves the working figures unchanged: 5 kg payload, 900 mm working radius, ±0.02 mm repeatability and up to 2 m/s at the tool centre point. The arm weighs 25 kg, draws 150 W, mounts upright, runs at 70 dB(A) or less and connects over a 5 m cable to a CC262 control cabinet in AC or DC versions.
IP68 does not make it an underwater robot: it is not designed for prolonged immersion. Grippers and sensors need the same protection as the arm, the controller and connectors must stay within their IP54 rating, and the air supply for the pressurisation system is confirmed with the quotation. For direct food contact, materials and cleaning procedures are checked against your process and local rules.
Key Capabilities
- IP68 arm: The robot arm is sealed against dust and water for wet and dusty cells where a standard cobot would need a protective jacket.
- Fluororubber exterior: All exterior plastic parts are fluororubber, which resists cleaning agents, oils and coolants.
- Positive pressure inside: An internal pneumatic system pressurises the arm to help keep dust and moisture out.
- IP54 control cabinet: The CC262 cabinet comes in AC and DC versions and is rated IP54.
- Unchanged CRA precision: Repeatability stays at ±0.02 mm, so the sealing costs nothing in placement accuracy.
- Three ways to program: Hand-guided teaching, graphical programming and code-based programming suit operators with and without robotics experience.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation, and on-site installation is not included in the product price.
Features
Specs
| Brand | Dobot |
|---|---|
| Model | CR5AP (CRA-IP68 series) |
| Dobot Part Number | 1200000257 |
| Product Type | Six-axis collaborative robot arm, IP68 sealed |
| Degrees of Freedom | 6 |
| Payload | 5 kg |
| Working Radius | 900 mm |
| Repeatability | ±0.02 mm |
| Maximum Linear Speed | 2 m/s |
| Joint Ranges | J1, J2, J4, J5, J6 ±360°; J3 ±160° |
| Maximum Joint Speed | J1 to J3 180°/s; J4 to J6 223°/s |
| End Effector I/O | 2 DI, 2 DO, 2 AI (shared with RS485) |
| Ingress Protection | Robot arm IP68; control cabinet IP54 |
| Exterior | Fluororubber exterior plastic parts |
| Sealing | Internal pneumatic system for positive pressure |
| Weight | 25 kg |
| Power Consumption | 150 W |
| Cable Length | 5 m |
| Operating Temperature | 0 to 50 °C |
| Noise | 70 dB(A) or less |
| Mounting | Upright |
| Control Cabinet | CC262, AC or DC versions |
| Air Supply for Pressurisation | Confirm at quote |
| What's in the Box | Confirm at quote |
Industries
Frequently Asked Questions
It keeps the 5 kg payload, 900 mm working radius and ±0.02 mm repeatability, and adds an IP68 sealed arm, fluororubber exterior parts, internal positive pressure and an IP54 control cabinet.
It is designed for humid areas with frequent cleaning, but not for prolonged immersion in water.
No. The CC262 control cabinet is IP54, so place it, its cables and connectors out of direct spray.
The arm uses an internal pneumatic system to hold positive pressure. The air supply it needs is confirmed with the quotation.
For direct food contact, the materials and cleaning procedure are confirmed against your process and local regulations before the order.
The Dobot CR5AP IP68 Collaborative Robot is priced at Rs. 1,726,700 in your market. For volume or project orders, contact us for a business quote.
Recently Viewed
You haven't viewed any products yet.
