- 3 kg payload over a 620 mm reach The smallest arm in the CRA series, sized for bench-scale work inside a short radius.
- ±0.02 mm repeatability Placement repeats to two hundredths of a millimetre, which is the tighter end of the collaborative-arm range.
- 2 m/s tool centre point speed Maximum TCP speed is 2 m/s, so cycle time does not have to be traded away for accuracy.
- Four industrial protocols on two WAN ports TCP/IP, Modbus TCP, EtherNet/IP and PROFINET are supported directly, with Modbus RTU over RS-485 and built-in Wi-Fi alongside.
- IP54 and 0 to 50 °C The arm is rated for dust and splash exposure and for ambient temperatures up to 50 °C.
- 16.5 kg and 120 W It weighs 16.5 kg, draws 120 W and runs from ordinary single-phase mains at 100–240 V AC, 47–63 Hz.
Description
The CR3A is the smallest arm in Dobot's CRA series of six-axis collaborative robots: 3 kg payload, 620 mm reach, 16.5 kg of arm. Repeatability is ±0.02 mm and the tool centre point moves at up to 2 m/s, which is the combination the series is built around — short cycle times without giving up placement accuracy.
It is a bench-scale arm for work that happens close in: machine tending, small-part assembly, pick and place, inspection handling, laboratory and test rigs. The 620 mm reach defines the envelope, so the useful question is not how heavy the part is but whether the whole task fits inside that radius.
Connectivity is unusually complete for an arm this size. Two WAN ports carry TCP/IP, Modbus TCP, EtherNet/IP and PROFINET, an RS-485 port carries Modbus RTU, and Wi-Fi is built in — so it can join a PLC-controlled line and a plant network without a protocol gateway in between. Power is ordinary single-phase at 100–240 V AC, 47–63 Hz, drawing 120 W.
The arm is rated IP54 and works from 0 to 50 °C, built from aluminium alloy and ABS plastic. End effectors, mounting hardware, the safety assessment for your cell and the programming environment supplied with the unit are specified per order rather than listed, so tell us the task and we will confirm the configuration in writing.
Key Capabilities
- 3 kg payload over a 620 mm reach: The smallest arm in the CRA series, sized for bench-scale work inside a short radius.
- ±0.02 mm repeatability: Placement repeats to two hundredths of a millimetre, which is the tighter end of the collaborative-arm range.
- 2 m/s tool centre point speed: Maximum TCP speed is 2 m/s, so cycle time does not have to be traded away for accuracy.
- Four industrial protocols on two WAN ports: TCP/IP, Modbus TCP, EtherNet/IP and PROFINET are supported directly, with Modbus RTU over RS-485 and built-in Wi-Fi alongside.
- IP54 and 0 to 50 °C: The arm is rated for dust and splash exposure and for ambient temperatures up to 50 °C.
- 16.5 kg and 120 W: It weighs 16.5 kg, draws 120 W and runs from ordinary single-phase mains at 100–240 V AC, 47–63 Hz.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.
Features
Specs
| Brand | Dobot |
|---|---|
| Model | CR3A (CRA series) |
| Product Type | Six-axis collaborative robot arm |
| Degrees of Freedom | 6 |
| Payload | 3 kg |
| Reach | 620 mm |
| Repeatability | ±0.02 mm |
| Maximum TCP Speed | 2 m/s |
| Weight | 16.5 kg |
| Input Power | 100–240 V AC, 47–63 Hz |
| Power Consumption | 120 W |
| Communication | 2× WAN for TCP/IP, Modbus TCP, EtherNet/IP and PROFINET; 1× RS-485 for Modbus RTU; Wi-Fi |
| Ingress Protection | IP54 |
| Operating Temperature | 0 to 50 °C |
| Materials | Aluminium alloy and ABS plastic |
| Joint Ranges and Speeds | Confirm at quote |
| Programming Environment | Confirm at quote |
| End Effector | Confirm at quote |
| Mounting Hardware | Confirm at quote |
Industries
Frequently Asked Questions
Up to 3 kg within a 620 mm reach, repeating to ±0.02 mm. It suits machine tending, small-part assembly, pick and place and laboratory or test handling where the whole task fits inside that radius.
Maximum tool centre point speed is 2 m/s. Joint ranges and individual joint speeds are confirmed with the order.
Two WAN ports carry TCP/IP, Modbus TCP, EtherNet/IP and PROFINET, and an RS-485 port carries Modbus RTU, so most plant controllers connect without a gateway. Wi-Fi is built in as well.
Single-phase 100–240 V AC at 47–63 Hz, drawing 120 W. No three-phase supply is required.
End effectors, mounting hardware and the programming environment supplied are specified per order. Describe the task and we will confirm the configuration in writing before you buy.
The Dobot CR3A Collaborative Robot Arm is priced at Rs. 1,427,400 in your market.
Recently Viewed
You haven't viewed any products yet.
