- 16 kg within 1,000 mm A high payload in a compact envelope, for dense loads that stay close to the base.
- Small cell footprint The short reach keeps guarding and floor space modest.
- ±0.03 mm repeatability Heavy parts are placed consistently into fixtures and machines.
- 40 kg arm, 350 W The arm weighs 40 kg and draws 350 W from single-phase mains.
- PLC-ready TCP/IP, Modbus TCP, EtherNet/IP and PROFINET on two WAN ports, Modbus RTU over RS-485 and Wi-Fi.
- IP54 arm Rated for dust and splash exposure, from 0 to 50 °C.
Description
The CR16A is the heavy-but-close arm of Dobot's CRA series. It lifts 16 kg within a compact 1,000 mm reach, from a 40 kg arm, for dense loads that do not travel far: steel blanks into a lathe, heavy castings onto a fixture, full cases off a conveyor beside the robot.
Keeping the reach short keeps the cell small. Where a 20 kg arm needs room for a 1,700 mm envelope, the CR16A works within 1,000 mm, so guarding and floor space stay modest. Repeatability is ±0.03 mm and maximum TCP speed 2 m/s.
It speaks the CRA range's protocols: TCP/IP, Modbus TCP, EtherNet/IP and PROFINET on two WAN ports, Modbus RTU on RS-485 and Wi-Fi. The controller runs on single-phase 100 to 240 V AC at 47 to 63 Hz and the arm draws 350 W.
The arm is rated IP54, works from 0 to 50 °C and is built from aluminium alloy and ABS. Count the gripper in the 16 kg, and plan a base rigid enough for heavy parts moved at speed.
Key Capabilities
- 16 kg within 1,000 mm: A high payload in a compact envelope, for dense loads that stay close to the base.
- Small cell footprint: The short reach keeps guarding and floor space modest.
- ±0.03 mm repeatability: Heavy parts are placed consistently into fixtures and machines.
- 40 kg arm, 350 W: The arm weighs 40 kg and draws 350 W from single-phase mains.
- PLC-ready: TCP/IP, Modbus TCP, EtherNet/IP and PROFINET on two WAN ports, Modbus RTU over RS-485 and Wi-Fi.
- IP54 arm: Rated for dust and splash exposure, from 0 to 50 °C.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation, and on-site installation is not included in the product price.
Features
Specs
| Brand | Dobot |
|---|---|
| Model | CR16A (CRA series) |
| Product Type | Six-axis collaborative robot arm |
| Degrees of Freedom | 6 |
| Payload | 16 kg |
| Reach | 1,000 mm |
| Repeatability | ±0.03 mm |
| Maximum TCP Speed | 2 m/s |
| Weight | 40 kg |
| Input Power | 100 to 240 V AC, 47 to 63 Hz |
| Power Consumption | 350 W |
| Communication | 2× WAN for TCP/IP, Modbus TCP, EtherNet/IP and PROFINET; 1× RS-485 for Modbus RTU; Wi-Fi |
| Ingress Protection | IP54 |
| Operating Temperature | 0 to 50 °C |
| Materials | Aluminium alloy, ABS |
| Joint Ranges and Speeds | Confirm at quote |
| End Effector | Confirm at quote |
| Mounting Hardware | Confirm at quote |
Industries
Frequently Asked Questions
Dense, heavy loads that stay close to the base, such as machine tending with steel blanks or moving full cases off a nearby conveyor.
1,000 mm. For more reach at a lower payload, the CR12A covers 1,200 mm at 12 kg.
Repeatability is ±0.03 mm.
Single-phase 100 to 240 V AC at 47 to 63 Hz; the arm draws 350 W.
TCP/IP, Modbus TCP, EtherNet/IP and PROFINET over two WAN ports, Modbus RTU over RS-485, and Wi-Fi.
The Dobot CR16A Collaborative Robot Arm is priced at Rs. 2,331,500 in your market. For volume or project orders, contact us for a business quote.
Recently Viewed
You haven't viewed any products yet.
