- Built for coolant and chips The IP68 arm withstands water, coolant and oil exposure, so it can reach into wet machine enclosures without a protective jacket.
- Sized for CNC tending Ten kilograms and 1,300 mm serve a machine and an infeed tray from one mounting point.
- AC or DC controller The IP54 CC262 cabinet takes 100 to 240 V AC or 30 to 60 V DC, so the same arm fits a fixed cell or a mobile platform.
- PLC-ready I/O 24 DI, 24 DO, analogue I/O and PROFINET or EtherNet/IP connect the arm to the machine's controller.
- Positive pressure sealing Internal pressurisation keeps the inside of the arm above ambient pressure to hold back mist and dust.
- Simple to teach Positions can be taught by hand, with graphical blocks or with scripts, from a PC, an Android app or a teach pendant.
Description
The CR10AP is the mid-size arm of Dobot's CRA-IP68 series, sized for machine tending in wet machines. Ten kilograms covers a two-jaw gripper plus most turned and milled parts, 1,300 mm reaches into a CNC enclosure and back to a pallet or tray, and the arm is sealed to IP68 against the coolant spray, chips and oil that come with the job.
Inside, positive pressure pushes against the seals to keep mist and dust out over long shifts. The CC262 control cabinet is rated IP54, measures 345 × 345 × 145 mm and takes AC input (100 to 240 V) or DC input (30 to 60 V), the DC version suiting mobile platforms. It provides 24 digital inputs, 24 digital outputs, 2 analogue inputs and 2 analogue outputs, with TCP/IP, Modbus TCP, EtherNet/IP and PROFINET over Ethernet, Modbus RTU over RS485, USB and an ABZ encoder input.
The arm weighs 40 kg, repeats to ±0.03 mm and moves at up to 2 m/s. J3 turns ±160° and the other joints ±360°; J1 and J2 reach 150°/s, J3 180°/s and the wrist 223°/s. It draws 350 W, mounts upright, connects over a 5 m cable and runs from 0 to 50 °C at 70 dB(A) or less.
Next to its siblings, the CR10AP doubles the CR5AP's payload and adds 400 mm of radius, while weighing far less than the 73 kg CR20AP. It is not designed for permanent use under water, and the IP54 cabinet belongs out of direct spray.
Key Capabilities
- Built for coolant and chips: The IP68 arm withstands water, coolant and oil exposure, so it can reach into wet machine enclosures without a protective jacket.
- Sized for CNC tending: Ten kilograms and 1,300 mm serve a machine and an infeed tray from one mounting point.
- AC or DC controller: The IP54 CC262 cabinet takes 100 to 240 V AC or 30 to 60 V DC, so the same arm fits a fixed cell or a mobile platform.
- PLC-ready I/O: 24 DI, 24 DO, analogue I/O and PROFINET or EtherNet/IP connect the arm to the machine's controller.
- Positive pressure sealing: Internal pressurisation keeps the inside of the arm above ambient pressure to hold back mist and dust.
- Simple to teach: Positions can be taught by hand, with graphical blocks or with scripts, from a PC, an Android app or a teach pendant.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation, and on-site installation is not included in the product price.
Features
Specs
| Brand | Dobot |
|---|---|
| Model | CR10AP (CRA-IP68 series) |
| Dobot Part Number | 1200000259 |
| Product Type | Six-axis collaborative robot arm, IP68 sealed |
| Degrees of Freedom | 6 |
| Payload | 10 kg |
| Working Radius | 1,300 mm |
| Repeatability | ±0.03 mm |
| Maximum Linear Speed | 2 m/s |
| Joint Ranges | J1, J2, J4, J5, J6 ±360°; J3 ±160° |
| Maximum Joint Speed | J1 and J2 150°/s; J3 180°/s; J4 to J6 223°/s |
| End Effector I/O | 2 DI, 2 DO, 2 AI (shared with RS485) |
| Ingress Protection | Robot arm IP68; control cabinet IP54 |
| Weight | 40 kg |
| Power Consumption | 350 W |
| Cable Length | 5 m |
| Mounting | Upright |
| Materials | Aluminium alloy, ABS |
| Noise | 70 dB(A) or less |
| Operating Temperature | 0 to 50 °C |
| Control Cabinet | CC262, 345 × 345 × 145 mm; AC 100 to 240 V or DC 30 to 60 V |
| Controller I/O | 24 DI, 24 DO, 2 AI, 2 AO |
| Communication | Ethernet (TCP/IP, Modbus TCP, EtherNet/IP, PROFINET); RS485 (Modbus RTU); USB; ABZ encoder input |
| What's in the Box | Confirm at quote |
Industries
Frequently Asked Questions
It marks the IP68 protected version of the CRA cobot, which adds sealing, internal pressurisation and an IP54 control cabinet.
Yes. The arm is designed for water, coolant and oil exposure, though not for permanent use under water.
The CC262 cabinet comes in an AC version (100 to 240 V) and a DC version (30 to 60 V). DC suits a battery-powered mobile platform, AC a fixed cell.
Repeatability is ±0.03 mm.
Over Ethernet with TCP/IP, Modbus TCP, EtherNet/IP or PROFINET, over RS485 with Modbus RTU, or through 24 digital inputs and 24 digital outputs.
The Dobot CR10AP IP68 Collaborative Robot is priced at Rs. 2,429,900 in your market. For volume or project orders, contact us for a business quote.
Recently Viewed
You haven't viewed any products yet.
